EVOLVE Add‐Ons Muzzle brakes, compensators, hybrids and flash hiders

Mission First Tactical, LLC (MFT), a leader in US‐made rifle/carbine accessories, brought its line of muzzle devices called the MFT EVOLVE Add‐Ons line to SHOT Show: 3‐prong ported muzzle brake, 4‐prong side port muzzle brake/compensator hybrid, 5‐direction compensator, Tapered 3‐port compensator and the 3‐prong flash hider.

The 3‐Prong Ported Muzzle Brake has 4‐ports on top reducing muzzle blast and the 2‐ports on the side direct gas horizontally, keeping recoil to a minimum. The front 3‐prongs help direct the remaining gas and concussion forward from the shooter. Traditional muzzle brakes direct gas in one way, horizontally, and MFT’s new 3‐prong ported muzzle brake takes it in a whole new direction. A 17PH4 stainless steel pre‐hardened MIL‐Spec crush washer is included.

MFT’s 5‐Direction Compensator disperses gas in five distinct directions. It aids in a wide gas flow to limit recoil and muzzle climb. There are no bottom slots to keep the dust down during low level shooting. The slim profile of the compensator matches the contour of the M4 style AR barrel, making for a clean, sleek transition. A 17PH4 stainless steel pre‐hardened MIL‐Spec crush washer is included.

The new hybrid is a 4‐Prong Side Port Muzzlebrake/Compensator that is designed to be a true hybrid. Gas is forced forward and away from the shooter, as well as being disbursed out of the sides. The first chamber helps direct gas up through the ports on top, which also aids with reducing muzzle climb. The gas exiting out of the sides aids in reducing recoil. The forward 4‐prongs direct the concussion and remaining gas forward and away from the shooter, making shooters on your left and right a little happier. A 17PH4 stainless steel pre‐hardened MIL‐Spec crush washer is included.

Designed to reduce recoil and muzzle climb, the Tapered 3‐Port Compensator features two angled ports on top to direct gas up and backward to aid in muzzle climb and recoil reduction. Three horizontal ports on each side direct the gas out and away, aiding in recoil reduction and adequate gas disbursements. The slim profile makes for a clean transition to the end of the barrel and is a must for custom AR builds.

The final new muzzle device from MFT is the 3‐Prong Flash Hider. It projects gas in the proper directions to keep the flash footprint to a minimum. It also channels a small amount of gas through a port upward to help diminish muzzle climb. The length and inside texture of the flash hider helps keep the flash signature to a minimum for most 5.56/.223 bullet grain weights providing for a flash‐less shooting experience. A 17PH4 stainless steel pre‐hardened MIL‐Spec crush washer is included.